The White Window Roman Shades Installation Guide
Image by Cara Woodhouse
You’ve made all the big decisions, the fabric, the fold style and the lining, and your custom shades from The White Window are on their way or already waiting by the door. All that’s left is to put them up. If you’re wondering how to fit roman shades, the good news is that it takes only basic DIY skills, a drill and four steps: fix the brackets, click the channel track into place, check the folds hang straight and secure the cord with its anchor.
This guide shows you how to hang roman shades step by step, with handy reference images and videos, whether your shades go inside the window recess or on the wall above it, and shows you how to take them down again when you need to.
The White Window’s Hardware Kit for Roman Shades

Â
The White Window roman shades are shipped with all the necessary hardware, including:Â
CHANNEL TRACK WITH PULL CORD: Our roman shades come fully assembled to make the installation process as easy and simple as possible. You’ll find your roman shades pre-mounted on the channel track with Velcro, and the pull cord already in place. Whichever cord color you select—silver or white—while placing your order, will be provided with your shades.
PULL CORD ANCHOR: The anchor holds the pull cord taut against the wall or window frame, so it isn’t left dangling within reach of children and pets, which matters in homes bursting with the cutesy, chaotic energy of little ones and furry friends.Â
BRACKETS & ANCHORS: Your kit will also include brackets and screws to affix the track. A shade of width up to 36 in can be securely mounted using two brackets. The kit will include extras in case you’d like to use more, and if a higher-width shade deems necessary. For wider shades, we generally recommend one bracket per 20 in. This is a general thumb rule and can vary based on the overall weight/size of the shade.
Inside Vs. Outside Mount: The Key Hardware Difference
 
Â
While specifying your order on our site, you’d have indicated if your shades are intended for mounting inside or outside the window recess. Please note that the hardware included with your order remains the same irrespective of the mounting style you have selected. The sole distinction in terms of installation is the positioning of the brackets, as seen below.Â

Â
INSIDE-MOUNT: For inside-mounted roman shades, drive the screw into the ‘top arm’ of the L-shaped bracket onto the ‘ceiling’ of the window frame.
OUTSIDE-MOUNT: For outside-mounted roman shades, drive the screw into the ‘back arm’ of the L-shaped bracket onto the wall above the window trim.
NOTE: In case you have planned to mount your roman shades to the ceiling of the room, use the same bracket positioning as for the inside mount roman shades i.e., affix the ‘top arm’ of the L-shaped bracket onto the ceiling of the room above the window trim.Â
How to Fit Roman Shades
We ship our roman shades pre-mounted with Velcro on the channel track. All you have to do is mount them in these four easy-peasy steps:
STEP 1: INSTALL THE BRACKETS
 
Â
Based on your chosen mounting position - inside or outside the window recess -Â install the brackets on the window frame ceiling or onto the wall/ ceiling above the window trim. We recommend using a pencil to first mark the points where you'll insert the screws to ensure that all brackets sit in a straight line.
As noted above, you’d need to drive the screw into the ‘top arm’ of the bracket onto the ‘ceiling’ of the window frame for inside-mounted shades. For outside-mounted roman shades, drive the screw into the ‘back arm’ of the bracket onto the wall above the window trim.
STEP 2: MOUNT THE CHANNEL TRACK

Â
The top profile of the channel track features a groove running across its length. To attach the channel to the brackets, align the groove on the track with the bracket. And click the channel into place.Â
Listen for a clicking sound, indicating that the channel has snapped into the brackets. Once done, give the channel a gentle tug to ensure it’s secure.Â
Check out the following video for reference:Â
Â
STEP 3: FIX ALIGNMENT ISSUES (IF ANY)
While many sellers provide the hardware and roman shades separately, we walk the extra mile and deliver ready-to-install pre-mounted custom roman shades to your doorstep. However, given the long journeys our shades make from our studios to their permanent homes, some settings may ‘move’ in transit and a rare shade may ‘skew’ when installed and operated. Panic not; this can be fixed in a jiffy.Â
You just need to adjust the lift lines at the back to re-align the roman shades and they'll fall into straight folds. For further details, refer to our blog post on fixing uneven roman shades.
Â
STEP 4: SECURE CORD WITH ANCHOR

Â
We strongly advise our clients to secure the pull cords with cord anchors provided in our kit. The anchor effectively ‘locks’ the pull cords in place, which is crucial for baby-proofing your home by keeping any dangling shade cords out of your little one’s reach.
Here’s how to use the cord anchor to secure your shade’s pull cords:
Â
Â
Separate the top white portion of the anchor from the bottom clear one with a gentle twist and pull. Loop the pull cord around the inner groove of the white part. Clasp the two parts of the anchor by pressing the white portion onto the clear part until it clicks into place, as shown in the following video–
Â
Â
Once you have linked the anchor onto the pull cord, the next step is to decide upon the exact position to secure the anchor on the frame/wall.Â
For the inside mount position, your cord and the cord anchor should ideally be positioned within the window recess/ frame and remain hidden behind the shade. In the outside-mount position, the cord can be secured onto the wall beside the roman shade and might remain visible.
The cord anchor position should enable the cord to hang taut. It should not be loose - but with just enough ‘give’ to allow the cord to operate smoothly at a tug. Adjust the placement of the cord anchor accordingly to derive this desired cord tension. Once you’ve decided on the apt placement of the anchor, simply screw it in and that’s it — you’re all done!
Dismounting Your Roman Shades
 
Â
So your roman shades are snug in place and all set. However, you may now wonder how to detach them, if ever needed, for cleaning or perhaps when moving. For this, press the clear ‘release’ buttons on the front profile of the brackets, and the channel tracks will detach. Again, that simple!
Fitting Roman Shades: FAQs
How do you fit a roman shade inside a window recess?
Screw the top arm of each L-shaped bracket into the top of the recess, then click the channel track into the brackets. The recess needs at least 2 in of flat surface.
How do you fit a roman shade outside the recess?
Screw the back arm of each bracket into the wall above the window frame and click the track in. On a small window, mount it higher so the folded shade sits on the wall rather than over the glass.
Can you fit a roman shade to the ceiling?
Yes. Use the inside-mount bracket position, with the top arm of each bracket screwed into the ceiling above the window.
How many brackets does a roman shade need?
Two for a shade up to 36 in wide, then roughly one for every 20 in of width. Extra brackets come in the kit.
What tools do you need to put up a roman shade?
A drill, a screwdriver, a pencil to mark the bracket positions and a level or tape measure to keep them in line. The brackets, screws and cord anchor come with the shade.
How do you take a roman shade down?
Press the clear release button on the front of each bracket and the channel track comes away. Click it back in when you’re ready.
Where should the cord anchor go?
Inside the recess for an inside-mounted shade, where it’s hidden behind the shade, or on the wall beside an outside-mounted one. Place it so the cord hangs taut, with just enough give to run smoothly.
In Closing
We hope our comprehensive guide has assisted you in installing your roman shades from The White Window and made the process a breeze. If, however, you have any further queries, we’re just an email away at hi@thewhitewindowshades.com and always happy to help!
WINDOW WISDOM: INSIDE OR OUTSIDE RECESS ROMAN SHADES | HOW TO FIX SKEWING ROMAN SHADES | ROMAN SHADE MEASUREMENT GUIDE
